Happy Clam

Happy Clam skiff

Happy Clam is a 17′ x 5′ 6″ Seabright skiff. Among the inherent advantages of this hull form are its shallow draft, great stability, and low center of gravity. Full protection for the propeller is provided by the box keel. Flow of unbroken water to the propeller is made possible by tapering the keel to […]

Kavalier 800

Kavalier 800

Kavalier 800 is another design by Albert Nazarov & Maxim Kovalyov from Thailand-based Albatross Marine design. They are also the designers of the smaller Pilgrim 590. Kavalier 800 is a 26 ft 3 in cabin sailor for the advanced builder. Go to the free boat plans (zip file)»

Pilgrim 590

Pilgrim 590

Pilgrim is a 19ft 4in cabin sailor designed by Albert Nazarov. He is a designer and founder of Albatross Marine design in Thailand. The designs they make are for professional boatbuilders. Although Albert Nazarov and his colleague Maxim Kovalyov made in the end 1990’s some designs that are freely available on the internet. One of […]

Egoist

Coastal cruiser Egoist

Egoist is a multichine plywood coastal cruiser, meant to be built in 8 mm + glass fiber + epoxy. This 18 ft long and 7 ft 10 in wide sailboat was thought, calculated, and conceived for easy coastal sailing. Her name suggests being single-handed and she’s comfortable for two. To receive these plans you have […]

Longtail fishingboat

Plywood longtail

These plans are a cross between Doris the dory and Thai fishing boats. The result is a 19ft 8in by 3ft 3in plywood boat that is able to oar, sail, and be powered by a small electric outboard. The boat has as little draft as possible to be able to move in less than 10 […]

Sea Angler

19 foot cabin cruiser

The nice thing about those old boat plans is that you can build your own classic cruiser like it’s an 1920’s build. This Sea Angler is a 20 ft by 8 ft deep V hull plywood cruiser that can be powered by an in- or outboard engine up to 150 hp. Go to the free […]

Nancy Jane

Inboard runabout

Nancy Jane is a 19 ft runabout that should be powered by a 15 to 100 hp inboard engine. It’s an all-purpose sea-worthy boat for utility, fishing, and pleasure cruising. Go to the free boat plans»

HA’Penny

Outboard cruiser

HA’Penny is an 18′ by 5′ 7″ V bottom cruiser that can be powered by an outboard engine up to 33 hp. The building process isn’t that difficult but it’s best to have some boatbuilding experience. These are old plans but the boat has nice lines and should be a head-turner on the local lake. […]

19 ft 8 inch Sharpie

Sharpie sailboat

Here are drawings of a 19’8″ by 4’8″ Sharpie sailboat. It’s an old racing design but is still used today. Due to the excellent sailing characteristics, fleets were created in a short time in Germany, the Netherlands, Belgium, and England. Most Sharpies were built in the pre-war years. The current Sharpies largely stem from those years […]

Parti-O

Pasrtyboat

Build your own party boat for the summer.  This is an easy built for party, fishing, and camping. Parti-O is a pontoon boat that can be powered by an outboard up to 18 hp. The construction is made out of plywood and is very easy. You can put it on the trailer to go and […]